Oculus External Rugged Camera

The Oculus is a professional vandal resistant, high speed continuous rotation PTZ. The housing has been cast in aluminium which is then anodised and powder coated allowing the unit to be installed in harsh and challenging environments.


The toughened glass viewing window is optically correct and distortion free providing brighter, clearer images even at full telephoto zoom ration. The range is available in both video and thermal imaging options, with or without IR and White light illumination and all models have a wiper as standard keeping the glass free from build-up of dust or debris. It is an all round performer and with its multitude of camera options it will perform in all weather conditions.




Pan Rotation/speed 360 degree continuous / Maximum 200 degree per sec/Minimum 0.006 degree per sec
Tilt Rotation/speed 290 degree / Maximum 200 degree per sec/ Mimimum 0.006 degree per sec
Mounting Upright, Cantered/ Hanging
Mounting Size 4” PCD, M8 fixings
Pan/Tilt Bearings Sealed for life
Motor Drive Long life toothed Polypropylene belt drive
Environmental Rating IP67
Connection Lead IP67 multiway connector
Casing Colours Black or White as standard. Other colours are available upon request
Optical Encoder Preset Accuracy 0.01 degree
Rotational Contacts Heavy duty slip rings
Absolute Positioning Yes
Position Control Capable of retaining position without drift
Preset Memory 32 PTZ positions, 16 tours, wash position
Privacy Zones 24 patches plus no drive zones
Communications Robust rs485 half duplex data comms, with on screen menus and SS Utility
Supported Protocols PELCO -D 9600 & 2400, PELCO-P 9600 & 2400, FV300, PHILIPS 9600 & 2400, VICON 9600 & 4800, SSP
Power Requirement 12 to 24v AC or DC 3AMP
Working Temperature minus 20C to plus 50C (optional heater and blower for -40C- to +60C)
Size 368 x 220mm






Oculus Camera 

By using this web site you consent to the use of cookies on this device unless you have disabled them. To close this message click on the blue square.